Standard Peristaltic pump
The Standard peristaltic pump is triggered by the hard-wired cooling signal from the air conditioning unit. The Standard is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive.
It can also be used on cassettes fitted with an internal lift pump. The pump can be mounted remotely as it is self-priming to a height of 10ft and will pump 1.65 USgal of water per hour against a maximum head of 39ft".
The pump runs constantly while the air conditioning system is cooling –when the cooling switches off a 3 minute timer ensures that the condensate tray is emptied before the pump switches off. Rollers in the pump act as check valves to stop the condensate draining back into the condensate tray. The Standard pump is a peristaltic rotary type - which means that it is quiet in operation, very reliable and will run dry without fear of damage or embarrassing noise. The Standard does not suffer from corrosion or contamination problems.
Technical Specifications
- Operates on hard-wired 150-230V cooling signal
- Self-priming lifts 11ft
- 39' 4" discharge head
- Water flow rate: 1.65gal per hr @ 39' 4"head
- 3 minute timer overrun
- No siphoning back
- No loud sound from dry running
- Manual test switch
- Pumps water, fibrously contaminated water and air
- Pump rating: 0.2A, 230V AC
Alternative voltages available - Fire retardant plastics
- Inlet/outlet size: 0.25"
- Push-in plug
- Wall-mounted bracket
Dimensions:
4.5"(H) x 5"(W) x 3"(D)
